Temperature & Humidity Testing

Environment Associates is outfitted with multiple chambers to suit all testing needs, including: table-top, standard-reaching, fixed or portable walk-in chambers, and if needed, drive-in chambers. All chambers are equipped with separate data-acquisition equipment for temperature and humidity monitoring. Any chamber can be readily equipped with our HP data acquisition systems to digitally record chamber conditions and your test article status in multiple location points. Many of our chambers are equipped with high-performance, maximum-size compressors to produce superior ramp rates equal to or greater than 15°C per minute.

Our chamber controllers include an infinite number of choices for ramps, loops, set-points, and temperature and humidity controls for any test program. During testing we can use the chamber controller outputs to turn on/off the test article, functional modes, power and other remote conditioning carts to operate in sync with the programmed temperature.

As a manufacturer of environmental chambers, together with our existing, diverse chambers in the lab, we can configure multiple chambers and remote conditions into a wide range of services for those products that have multiple components that are out of phase and range with each other. For example, an automotive component can be both interior mounted and engine compartment mounted; thus requiring the test to be conducted at two different temperatures and humidity levels. Our specialists can create and build what you need for your unique test program.

Walk-In Chamber Testing

Environment Associates is an unique high-performance manufacturer of standard and portable walk-in chambers from 95 cu. ft. (2.69 cu. m) to 500 cu. ft. (14.2 cu. m). With standard walk-in chambers that can be manufactured to 1,500 cu. ft. (42.5 cu. m). If you need to test a product such as a solar panel, instrument panel, vehicle, tractor truck or a large sample count of parts, we will develop a chamber solution for you.